The feed silo is made of corrugated steel, which significantly stiffens the tank structure and provides resistance to dents. As standard, this silo is equipped with a 100 mm pipe for loading by a mixer feeder, which is connected to the silo via a universal hydrant nozzle. We use cast-iron elbows elbows with 4 mm wall, so there is no possibility of pipe rubbing. The hydrant coupling is attached to the pipe with a thread. Venting is done by means of a vent pipe with a diameter of 150 mm. At the end of this pipe, there is a bracket for mounting a bag to reduce dust during loading. Our silos have a 60 degree funnel angle, which prevents the feed from stucking. Each silo is equipped with a hatch in the funnel, through which we can clean the silo. The feed tank is finished with a standard 44 cm opening, so it fits all the most popular feed basket. The legs are made of the strongest OMEGA profile made of S350 sheet, which increases the durability by 20%. We use screws with a special SealerPlus coating for the assembly of the silos. These screws are 2 times more resistant than standard screws. We use thick flange bolts M8 and M10 with increased hardness of 8.8. AGOS silos work in the most extreme conditions, from – 30 to + 70 degrees. We have the cheapest loading and unloading system through a diagonal loading pipe using a 17t/h turbo auger.

Loading / unloading of silos

Turbo auger for loading/unloading 17t/h
an auger that allows both loading and unloading of the silo. One auger is used for several silos. The cheapest solution available on the market.
Vertical conveyor 20t/h
Solution for 2 to 4 silos. The advantage is the single basket, which makes it possible to load several silos without having to reposition the auger
Bucket conveyor 30 -50 t/h
The most expensive solution used to load at least 4 silos. Ideally suited for very frequent loading
Other options
Blower loading via diagonal pipe 5-15 t/h
Great option if you already have a min 5.5 kW blower. By using a diagonal loading pipe, there are no elbows so the blower operates at 100% of its power.
Loading through roof hatch 17t/h
The auger is equipped with a carriage to move it. Loading is done through the top of the silo, but requires opening the hatch each time. A solution that works well on the paved area around the silo.